4DPI-32-II

4DPI-32-II is a 3.2" 320×240 primary display for the Raspberry Pi which plugs directly on top of a Raspberry Pi and displays the primary output which is normally sent to the HDMI or composite output. It features an integrated resistive touch panel, enabling the 4DPi-32-II to function with the Raspberry Pi without the need for a mouse. Communication between the 4DPi-32-II and the Raspberry Pi is interfaced with a high-speed 48MHz SPI connection which utilises an on-board processor for direct command interpretation and SPI communication compression and features a customized DMA enabled kernel. The 4DPi-32-II is designed to work with the Raspbian OS running on the Raspberry Pi as that is the official Raspberry Pi OS. The new PIXEL addition to Raspbian is also supported.

• Compatible with Raspberry Pi A+, B+, Pi2, Pi3, Zero, Zero W versions
• RGB 65K true to life colours, TFT screen with integrated 4-wire resistive touch panel
• Display full GUI output / primary output, just like a monitor connected to the Raspberry Pi
• High speed 48MHz SPI connection to the Raspberry Pi, featuring SPI compression technology
• Powered directly off the Raspberry Pi, no external power supply is required
• On/off or PWM controlled backlight, selectable by on board jumper
• On-board EEPROM for identification (NEW version HW only)
• Mod dimensions is 57.3 x 92.4 x 20.5mm (including corner plates), 48.6 x 64.8mm display viewing area
• Supply voltage range from 4.5V-5.5VDC and 150mA supply current
• 4x corner plates with 2.6mm holes for mechanical mounting