MAX105ECS+

The MAX105ECS+ is a dual, 6bit 800Msps analogue to digital converter (ADC) with on-chip, wideband input amplifier in 80 pin TQFP package. This ADC is designed to allow high speed, high bandwidth and precise digitizing of in-phase (I) and quadrature (Q) baseband signals. It converts analogue signals of both I and Q components to digital outputs at 800Msps while achieving a signal to noise ratio (SNR) of typically 37dB with an input frequency of 200MHz and an integral nonlinearity (INL) of ±0.2LSB and differential nonlinearity (DNL) of ±0.25LSB. A fully differential comparator design and encoding circuits reduce out of sequence errors and ensure excellent metastable performance of only one error per 10^16 clock cycles. It provides LVDS digital outputs with an internal 6:12 demultiplexer that reduces the output data rate to one-half the sample clock rate and output data is in two’s complement format. It is used in VSAT receivers, WLANs and test instrumentation.

• Analogue supply voltage range is 4.75V to 5.25V, digital supply voltage range from 3V to 3.6V
• Operating temperature range from -40°C to 85°C
• Excellent dynamic performance (36.4dB SINAD at fIN = 200MHz and fCLK = 800MHz)
• Channel to channel phase matching is ±0.2°
• Channel to channel gain matching is ±0.04dB
• Flash or parallel architecture
• On-board +2.5V precision band gap reference
• Offset voltage of ±0.25LSB
• ±0.1LSB offset matching between ADC's
• Crosstalk between ADCs is -70dB

Lietošanas veidi

Signal Processing, Industrial, Communications & Networking

Piezīmes

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party